ivy@xinbailing.net

0086-0533-5411652

DOWLOUDS
CREATE BRAND IMAGE

Home > News>Matters needing attention before installation of Lighting Br

Matters needing attention before installation of Lighting Br

  2018-08-24 09:41       

Before installing the lighting bridge, the load, the size and deflection of the bridge should be calculated according to the structural characteristics of the building, and the appropriate span should be determined. Not only the required deflection of the load must be met, but also the convenience of installation must be considered. Outdoor installation may be considered with process piping, but it should be noted that the cable disc should be installed along the flammable, explosive and low risk side. When explosive gas is lighter than air, the bridge should be installed below, and vice versa, and the bridge should avoid laying parallel above or below the pipe in the process.

Lighting Bridge

The cable disc is horizontal, the connecting head between the bridges spans as long as possible about 1/4, and the horizontal cable is fixed at intervals of about 2 m, the vertical cable is fixed once, and every 1. 5 m cable disc shall be a viable ground construction requirement, The whole bridge should have good electroosmotic, joint bridge part, connection resistance no more than 0.00033 oh, long distance cable disc should be temperature compensation measures (usually steel bridge every 30 meters, aluminum alloy bridge every 15 meters), cable disc every 30 ~ 50 meters ground again.

Product Name:Matters needing attention before installation of Lighting Br
Copyright Note: If not noted, this site is Zibo Xin Bai Ling Industry & Trade Co., Ltd. original, reproduced please indicate the source and attached text links.

Garment factory production line layout, which one do you lik
DETAILS

  2019-05        373

Garment factory production line layout, which one

The principle of the layout of the packing table can be summarized as: two observances, two avoidances. Two observances: counterclockwise arrange

How to maintain the workbench in use
DETAILS

  2018-11        374

How to maintain the workbench in use

1. It is forbidden to use steam to disinfect. 2. regular performance testing, found problems in time for maintenance. 3. After using the cutting

Variety of workbench
DETAILS

  2018-11        346

Variety of workbench

There are a lot of work tables on the market. In fact, cuttingtable there are roughly five categories of application site classifications dependi

QR CODE

HOME

PRODUCTS

ABOUT US

NEWS

CONTACT

DOWNLOADS

TEL:

0086-0533-5411652

E-mailbox:

ivy@xinbailing.net

ADD:

277 West Road Cannes ,Zichuan Development Zone, Zibo City , Shandong Province

China Good Quality Supplier. Copyright © 2016 - 2017 http://www.xblindustry.com. All Rights Reserved.