Home > News>How to choose reliable LED manufacturers for lighting bridge

How to choose reliable LED manufacturers for lighting bridge

  2018-08-01 10:37       

Nowadays, there are a lot of lighting fixtures on the market. We don’t know where to buy when we buy, so we should understand some parameters of led lighting fixtures before purchasing LED bridge lighting fixtures. How to choose reliable ones LED industrial and mining lamp manufacturers, do not worry. Xinbailing Lighting is for you!

Lighting bridge LED lights purchase considerations:

1. Antistatic ability: LED with strong antistatic ability and long life. LEDs with an antistatic greater than 700V are usually used for LED lighting.

2. Brightness: The brightness of the LED is different and the price is different.

3. LEDs with the same wavelength have the same color and high price. It is difficult for manufacturers without LED spectrophotometers to produce pure color products.

Illumination angle: LEDs with different uses have different illumination angles. Special lighting angle, the price is higher. Such as the full diffusing angle, the price is higher.

Lighting Bridge

LED chip: LED illuminator is a chip, different chips, the price difference is very large, the imported chip is more expensive.

Leakage current: LED is a unidirectional conductive illuminator. If there is reverse current, it is called leakage, and LED with large leakage current has short life and low price.

7. C
hip size: The size of the chip is expressed by the side length. The quality of the large chip LED is better than that of the small chip. The price is proportional to the chip size.

Power supply: According to the design requirements of different manufacturers, it can be divided into two types: constant current power supply and constant voltage power supply. No matter which one, the power supply plays a central role in the service life of the whole lamp.

How to choose a reliable LED industrial and mining lamp manufacturers, do not worry, strongly recommend Zibo Xinbailing Industry and Trade Co., Ltd. A manufacturer specializing in the manufacture of LED lamps, assembly line tables, and assembly line boards, integrating R&D, production and sales. Now it mainly includes industrial and mining lamps and power supply track series kits. Widely used in the lighting of workshops, factories, warehouses, highway toll stations, gas stations, large supermarkets, exhibition halls, stadiums and other places. Welcome to buy!

Product Name:How to choose reliable LED manufacturers for lighting bridge
Copyright Note: If not noted, this site is Zibo Xin Bai Ling Industry & Trade Co., Ltd. original, reproduced please indicate the source and attached text links.

Garment factory production line layout, which one do you lik

  2019-05        373

Garment factory production line layout, which one

The principle of the layout of the packing table can be summarized as: two observances, two avoidances. Two observances: counterclockwise arrange

How to maintain the workbench in use

  2018-11        374

How to maintain the workbench in use

1. It is forbidden to use steam to disinfect. 2. regular performance testing, found problems in time for maintenance. 3. After using the cutting

Variety of workbench

  2018-11        346

Variety of workbench

There are a lot of work tables on the market. In fact, cuttingtable there are roughly five categories of application site classifications dependi













277 West Road Cannes ,Zichuan Development Zone, Zibo City , Shandong Province

China Good Quality Supplier. Copyright © 2016 - 2017 http://www.xblindustry.com. All Rights Reserved.