What are the considerations for the use of pipeline board
The pipeline board of pipelined panels is very high. What should we pay attention to before installing rollers, racks and rollers in order to ensure that the conveyor belt is always running on the center line of rollers and rollers?
1. Fasten the frame to the foundation or floor. After the belt conveyor is fixed, feeding and unloading devices may be installed.
2. When the conveyor belt is mounted, the belt strip is first laid on the idling roller, and then applied to the heavy load section roller. The hanging strip can be used by hand winch of 0. 5-1. 5 t. When connecting the straps, the drum of the tensioning device should be moved to the limit position, the trolley and the helical tensioning device should be moved to the direction of the drive, and the vertical pick up device should make the drum move to the top.
3. All rollers must be aligned, parallel to each other, and maintained at a horizontal level.
4.All the rollers are arranged in parallel with each other. Before tightening the conveyor belt, the reducer and motor should be installed, and the tilted conveyor should be equipped with braking device. After the belt conveyor is installed, it is necessary to carry on the idle test machine.
5.The support frame must be straight and horizontal. For this reason, after the installation of the driving roller and the roller bracket, the center line and the level of the conveyor should be finally corrected.
Xinbailing industry Specializing in designing and supplying workshop solutions to garment factories all around the world,such as Spreading table,Cutting table,Packing table,Inspection table,Racks, Trolleys ,Lighting bridge and so on.