ivy@xinbailing.net

0086-0533-5411652

DOWLOUDS
CREATE BRAND IMAGE

Home > News>Lighting bridge is widely used in production and life.

Lighting bridge is widely used in production and life.

  2018-08-09 10:09       

It is widely used in production and life. When selecting the type, it should pay attention to whether all the components of the lighting bridge meet the requirements of serialization, generalization and standardization. The lighting bridge in the building can be independently assumed or attached to various constructions. (structure) and pipe gallery brackets should be characterized by simple structure, beautiful appearance, flexible configuration and convenient maintenance. All parts need to be galvanized and installed in the open-air bridge outside the building, if it is near the seaside. Or it belongs to the corroded area, the material must have the physical properties of anti-corrosion, moisture resistance, good adhesion and high impact strength.





In order to reduce the weight, aluminum alloy cable and FRP bridge can also be used. The outer dimensions and load characteristics are similar to those of steel bridges. Because of the different specific gravity of aluminum and steel (A1=2.7, Fe=7.86, the ratio of aluminum to steel by weight) About 1:3, according to the market price of the two materials, the cost of the aluminum alloy bridge is 2.0 times higher than that of the similar galvanized steel bridge. The lighting bridge has the advantages of beautiful appearance, light weight and convenient installation. The aluminum alloy bridge has been applied in some projects. The bridge is suitable for power cables with voltages below 10 kV, as well as indoor and outdoor overhead cable trenches and tunnels for control cables, lighting wiring, pneumatics, hydraulic cables, etc. At the same time, Yunnan lighting bridge has the characteristics of wide application, high strength, light weight, reasonable structure, low cost, long service life, strong anti-corrosion, simple construction, flexible wiring, standard installation and beautiful appearance.


Xinbailing industry Specializing in designing and supplying workshop solutions to garment factories all around the world,such as Spreading table,Cutting table,Packing table,Inspection table,Racks, Trolleys ,Lighting bridge and so on.

Product Name:Lighting bridge is widely used in production and life.
Copyright Note: If not noted, this site is Zibo Xin Bai Ling Industry & Trade Co., Ltd. original, reproduced please indicate the source and attached text links.

Garment factory production line layout, which one do you lik
DETAILS

  2019-05        373

Garment factory production line layout, which one

The principle of the layout of the packing table can be summarized as: two observances, two avoidances. Two observances: counterclockwise arrange

How to maintain the workbench in use
DETAILS

  2018-11        374

How to maintain the workbench in use

1. It is forbidden to use steam to disinfect. 2. regular performance testing, found problems in time for maintenance. 3. After using the cutting

Variety of workbench
DETAILS

  2018-11        346

Variety of workbench

There are a lot of work tables on the market. In fact, cuttingtable there are roughly five categories of application site classifications dependi

QR CODE

HOME

PRODUCTS

ABOUT US

NEWS

CONTACT

DOWNLOADS

TEL:

0086-0533-5411652

E-mailbox:

ivy@xinbailing.net

ADD:

277 West Road Cannes ,Zichuan Development Zone, Zibo City , Shandong Province

China Good Quality Supplier. Copyright © 2016 - 2017 http://www.xblindustry.com. All Rights Reserved.