Home > News>Correct operation of pipeline board

Correct operation of pipeline board

  2018-08-24 08:58       

Before the operation of the assembly line board, first of all, it is necessary to confirm that the belt line equipment, personnel, and transported items are in a safe and sound state; secondly, to check that the moving parts are normally free of foreign bodies, and to check whether all electrical lines are normal, Normally, the belt line can be put into operation. Finally, check that the difference between the supply voltage and the rated voltage of the equipment does not exceed ±5.

pipeline board

The following operations must be performed in operation on the pipelined board:

1. Close the main power switch and check if the power supply is normal and the power indicator light is on. Take the next step after normal.

2. Close the power switch of each circuit and check if it is normal. Under normal condition: the equipment does not move, the pipeline board operation indicator lamp is not on, the inverter and other equipment power indicator light, the frequency converter display panel display normal (no trouble code display).

3. Start the electrical equipment according to the process flow, and then start the next electrical equipment after the last electrical equipment starts normally (the motor or other equipment has reached the normal speed, normal state).

In the operation of pipelined board, it is necessary to abide by the provisions of the goods to be transported in the design and the design ability of the pipelined board. Second, pay attention to all kinds of personnel must not touch the moving parts of the assembly line board, non-professionals should not be free to contact electrical components, control buttons and so on. Finally, the converter can not be operated on the pipeline board.

The pipeline board stops running. Press the stop button to stop the system before cutting off the total power supply.

Product Name:Correct operation of pipeline board
Copyright Note: If not noted, this site is Zibo Xin Bai Ling Industry & Trade Co., Ltd. original, reproduced please indicate the source and attached text links.

Garment factory production line layout, which one do you lik

  2019-05        373

Garment factory production line layout, which one

The principle of the layout of the packing table can be summarized as: two observances, two avoidances. Two observances: counterclockwise arrange

How to maintain the workbench in use

  2018-11        374

How to maintain the workbench in use

1. It is forbidden to use steam to disinfect. 2. regular performance testing, found problems in time for maintenance. 3. After using the cutting

Variety of workbench

  2018-11        346

Variety of workbench

There are a lot of work tables on the market. In fact, cuttingtable there are roughly five categories of application site classifications dependi













277 West Road Cannes ,Zichuan Development Zone, Zibo City , Shandong Province

China Good Quality Supplier. Copyright © 2016 - 2017 http://www.xblindustry.com. All Rights Reserved.